Legacy™ Series Distribution Amplifiers - SDI/DA-LT 한 개의 SDI를 입력 받아서 2개의 SDI출력으로 분배하는 장비 입력허용신호 : 270 Mb/ s or 360 Mb/ s Serial Digital, 800 mV 입력 : SDI 출력 : SDI 전원 : 8-24VDC grounded or ungrounded, 13-24VAC ungrounded, <100 mA 어뎁터 (포함)   SDI/DA-LT (# 100-0-018): The SDI/DA-LT is a Serial Digital Interface Distribution Amplifier. The unit has a single loop-thru input and uses a distribution amplifier to provide two outputs that are the same signal strength as the input. This is referred to as “unity gain”. The SDI/DA-LT will work with either 270 Mb/s or 360 Mb/s serial digital information at 800 mV. The SDI/DA-LT loop-thru feature allows the original signal to go through unimpeded while producing two taps to process or monitor the input signal. If the loop-out feature is not used, a 75 Ohms terminator must be in place. The SDI/DA-LT ships with a 75 Ohm terminator and wall transformer Specifications Input Signal 270 Mb/ s or 360 Mb/ s Serial Digital, 800 mV Input Impedance > 3K Ohms Input Coupling DC Gain Unity (Fixed) Number of Outputs 2 Output Signal Level Same as Input Output Impedance 75 Ohms Connectors BNC Power Requirements 8-24VDC grounded or ungrounded, 13-24VAC ungrounded, <100 mA Dimensions 3.00” W x 0.65” H x 2.75” L (with connectors) Shipping Weight 2 lbs (with transformer)