SCAA010 - BALBOX Serial to Composite with 2 o/p Audio Extraction 오디오가 embed 된 SDI 신호를 입력받아 오디오를 분리하여 Composite으로 출력하는 장비 Local/GPI 컨트롤 입력 : 1 x SDI 출력 : 2 x Composite, 2 mono balanced audio   SCAA010 - BALBOX Serial to Composite with 2 o/p Audio Extraction. Converts an SDI signal to analogue composite video for mnitoring and extracts and converts one embedded stereo pair. A reclocked SDI output is provided, along with two composite outputs. Analogue audio is output on two XLR’s. INPUT Input signal: 270 Mb/s serial NRZI to SMPTE RP259M and EBU Tech 3267 with digital audio embedded to SMPTE 272M-AC (synchronous audio at 48kHz) Input equalisation: automatic up to 250m of Belden 8281 cable or similar SDI OUTPUT Output: 270 Mb/s serial NRZI to SMPTE RP259M and EBU Tech 3267 Output level: 800mVp-p +/-20mV across 75ohm termination COMPOSITE OUTPUT Output: 625/50 PAL or 525/60 NTSC automatic switching Output level: 1.0Vp-p +/-7mV across 75ohm termination Frequency Response: +/-0.25dB to 5.5MHz ANALOGUE AUDIO OUTPUTS Number of outputs: Two (one for each mono or half of the stereo pair within the selected AES/EBU signal) Output: Electronically balanced Impedance: <75ohm Output level: 18/24dBuFS – user selectable THD: <0.007% Noise: <-74dBu (idle channel) Output Connectors: XLR-style male CONTROLS AES audio mute: DIP switch (position 1) Analogue output level: DIP switch (position 2) Audio selection: Rotary switch, positions 0-7, selecting groups 1-4 and analogue outputs 1-8 INDICATORS Tri-colour status LED: Red: no SDI input Orange: SDI present – no embedded audio detected Green: SDI present – embedded audio detected INSTALLATION DATA Package: Standard BALBOX housing, with two ‘XLR’ male and two 75ohm BNC connectors 184 x 103 x 42.4mm. Weight: 950g. Mains supply: 90 – 250Vac Consumption: <10VA