|
|
SVAC011 - BALBOX Serial Video DA and Composite Converter
한개의 SDI를 입력 받아서 4개의 Composite 으로 변환하는 장비
4 x SDI Loop out
입력 : 1 x SDI
출력 : 4 x Composite, 4 x SDI
| SVAC011 - BALBOX Serial Video DA and Composite Converter |
The SVAC011 provides conversion of serial digital video signals to analogue composite and also provides four re-clocked SDI outputs. Four composite outputs may be switched to YC. When operating in a 525-line environment, setup may be added to the analogue output. VITS may be passed or blanked, and analogue line-blanking may be applied or disabled. The SDI input has automatic cable equalisation and four re-clocked SDI outputs are provided. The unit can be set to produce either digital black or a noise signal on loss of input. The unit has an integral mains power supply.
INPUT
Input signal: 270 Mb/s serial NRZI to SMPTE RP259M and EBU Tech 3267
Impedance: 75ohm
Return loss: >15dB, 10MHz to 270MHz
Input equalisation: automatic up to 250m of Belden 8281 cable or similar
SDI OUTPUTS
No of outputs: 4
Output: 270 Mb/s serial NRZI to SMPTE RP259M and EBU Tech 3267
Impedance: 75ohm
Return loss: >15dB, 10MHz to 270MHz
Output level: 800mVp-p +/-20mV across 75ohm termination
ANALOGUE VIDEO OUTPUTS
No of outputs: 4
Resolution: 8-bit
Amplitude: 1V ± 1%
Frequency response: <0.2dB to 5.5MHz
Kp: 0.5% typ
Noise: >70dB
Chroma –Luma Delay: <15ns |
|
|
|
