Anywhere composite analog legacy equipment must interface with a digital switcher
Specifications
I/O
Input(1) NTSC SMPTE 170M or PAL ITU 624-4 Looping
(1) Y & C: 0.7 Vp-p/75ohm
Output(4) 4:2:2 SMPTE 259M-C (270 Mbps)
User ControlsRotary KnobProc amps
Contrast
Brightness
Tint
Color
Sharpness
Video Source
525/625 Select
Setup Level (pedestal)
Status LEDsPower On
Loss of Sync Error
Technical Quantization: 10-bit accurate
Sampling: 27 MHz (x2 oversampling)
Proc Range: Auto Cal/Manual 6dB
Jitter: .15UI
Signal to noise: >60dB BW= 6.00 MHz
Processing delay: .7us – SDI path
2. 0us- (M) onitor path
Differential phase: <2¡Æ @ 3.58 MHz (M)
Differential gain: <2% @ 3.58 MHz (M)
K-Factor: <2% (2T Pulse) (M)
Frequency response
CV: flat to 4.5MHz, -3dB @ 5.5MHz (M)
Y Cr(V) Cb(U): flat to 6.0 MHz
PhysicalDimensions1.5 (H)x 5 (D) x 4 (W)
(3.8 x 12.7 x 10cm)
OptionBVRMK Rack Adapter (4 per 1 RU)
Weight<15 ozs. (< 425g)
Power5 VDC (1600mA)
External PSU: 100/240 VAC, 47- 63 Hz
Power consumption less than 10 watts
Environmental
Operating Temperature: 0- 40 ¡Æ C
Storage Temp: -20¡ÆC to +70¡ÆC (non-condensing)
Humidity: 90% max (non-condensing)