¸ðµ¨ : SDM-560M SERIAL DIGITAL/COMPOSITE VIDEO SIGNAL MONITOR WITH MEASUREMENT

Serial Digital 601 °ú Analog Composite½ÅÈ£¸¦ ÀÔ·Â ¹Þ¾Æ Waveform, Vector, Picture, Audio Amplitude, Phase, Digital signal status matrix display¸¦ SDI ¶Ç´Â Composite ¸ð´ÏÅÍ·Î Ãâ·ÂÇÏ´Â Àåºñ
SDI ¿¡¼­ Component, Composite·Î º¯È¯±â´É Áö¿ø
SD601 (525/625), S-Video, Composite (NTSC/PAL) Áö¿ø
ÀÔ·Â : Composite, S-Video, SDI, AES-3
Ãâ·Â : Composite, S-Video, SDI, AES-3
Àü¿ø : 100-240 VAC, 50/60 Hz  

Split Screen Display

Auomated Measurement Screen

Remote Log Book Display
 

Remote Report
Output

Serial Digital/Composite Video and Audio Monitoring

The Magni SDM-560M Serial Digital/Composite Video Monitor adds automated measurement, remote control, remote reporting, and audio phase meter displays to the SDM-560 patented rasterizer monitoring platform.

The SDM-560M's revolutionary display technology provides picture, waveform, vector, audio, and digital measurements for Serial Digital 601 and Composite analog signals on a single screen. Designed as a "true" digital monitoring system, it provides on-screen readings of digital signal strength, jitter and EDH errors.

The SDM-560M Serial Digital/Composite Video Monitor

Raster Scan Monitoring Systems
The SDM-560 series uses Magni's patented phosphor simulation raster scan technology for displaying waveforms. Raster scan on-screen displays provide picture, waveform, vector, and measurement screens, eliminating the inherent CRT errors and size constraints of direct view monochrome analog CRTs.
Magni's patented "Adaptive Graticule" technology provides different graticules and color capabilities for individual measurements, eliminating the clutter and associated problems of internal and external graticules required by analog CRTs.
Furthermore, standard video output on-screen displays provide a routable video signal for distribution within or outside of the television facility.

 
Automated measurements with remote control and reporting.
On screen display output of waveform, vector, picture, audio and signal parameters in both SDI and Composite formats.
Multi-window display on a standard Composite or SDI capable picture monitor.
On screen readout of SDI parameters such as signla strength, jitter, EDH error. Gamut verification with picture bright up.
Multi-standard, NTSC/PAL, 525/625
Audio metering and phase displays of embedded SDI, AES-3 or 4 channel analog audio input, plus outputs for aural monitoring.
Compact, 2RU, efficient, internal power supply draws less than 100 VA, user-friendly control and interface.
Picture Guard

 

Component Parade
Composite Display
Menu

Magni Systems, Inc. has been a leading provider of innovative television test and measurement, and computer graphics-to-video products since 1984. Magni's products provide signal sources and perform monitoring and measuring functions for braodcast stations, cable television, production studios, digital content creators, and video equipment manufacturers worldwide. Magni's technology, innovation and expertise have produced market-leading products which have received two prestigious EMMY awards.

 

 

 

  Rear Panel Connectors
 
  Automated Measurements
 
Digitall
System Video
Component

DIGITAL PARAMETERS
Audio Level (Embedded & AES)
Anciliary Presence
EDH
Embedded Audio Presence
Gamut (Composite)
Gamut (Component)
Gamut (GBR)
Jitter (Timing)
Jitter (HPF-Alignment)
Peak Video
Signal Strength
TRS (Timing Reference Signal)
Audio (4Channels)

ANALOG PARAMETERS
Audio Level
Average Picture Level
Bar Amplitude
Burst Amplitude
Burst Reference Phase
Chroma/Luma Delay
Chroma/Luma Gain
Chroma Reference
Color Frame
Component Color Bar Msmt.
Composite Color Bar Msmt.
Differential Gain
Differential Phase


Frequency Response
Horizontal Reference Timing
Horizontal Blanking Width
K-2T Factor
Luminance Linearity (Pal Only)
Noise
Peak Luminance
Peak Video
Pulse to Bar Ratio
SCH Phase
SYNC Phase
SYNC Amplitude
Audio (4 Channels)

  Specifications
 

VIDEO STANDARDS
525/625 Serial Digital 601 (SMPTE 259M, ITU-R BT.601-5), NTSC and PAL Composite

INPUTS
Video Inputs:
Two SDI loop through inputs (input A and B)
Format: 270 Mbit/s 4:2:2 525/625 Component, complies with SMPTE 259M and ITU-R BT.601-5
Input level: 800 mV peak to peak +/- 10%
Return loss: >= 15 dB, 1-270 MHz
One composite and one S-video loop through inputs (input D)
NTSC and PAL Standards: 1V p-p
Return loss (75
W): > 400 dB to 6 MHz
Audio inputs:
Two AES-3 (75
W single ended unbalanced input, 9 pin D-sub)
External Reference Input:
Composite loop through (NTSC/PAL)

OUTPUTS
Picture Monitor Display Outputs:
Serial Digital 601, Composite, and S-video
Decoded SDI Outputs (Analog Video):
Component (Y,R-Y,B-Y,525/625)
Auxiliary Outputs(AUX OUT):
One Composite and One S-video (NTSC or PAL)
Audio Outputs (9 pin D-sub):
Two AES-3 digital audio outputs (balanced)
Four channel analog audio outputs (unbalanced)
Audio monitor output (two front panel 1/4-inch headphone jacks for audio monitoring)


 

DISPLAY
all displays are through SDI-capable or Composite picture monitor.
Waveform, vector, picture, audio, amplitudes and phases, digital signal status matrix display through SDI-capable or Composite picture monitor.
Measurements, waveform, vector, picture on-screen display with audio meters.
Serial digital parameters readout of signal strength, jitter, and EDH errors.
Gamut error detection with bright-up capability
Picture Guard alarm on any "Out of Limit" condition.

TIME READOUT
VITC or Real Time Clock (RTC)

MEASUREMENT SCREENS
Digital Screen
Component Screen
Composite Screens: System Video, Color Set-up, Frequency Response, Non-linear

PICTURE GUARD
Digital Signal Parameters
Composite Signal Parameters

TRANSCODING
SDI to Y,R-Y,B-Y (Y,PR,PB)
SDI to Composite and Y/C

WFM
Vertial gain accuracy: +/- 1% with 1.0 V input
Vertical MAG: x 2.5 typical
Frequency response: +/- 2% to 8 MHz (Waveform mode)
Pulse to bar ratio: 0.99:1 to 1.01:1 typical
Sweep timing accuracy: Digitally derived

VECTOR
Display accuracy:
Amplitude error: +/- 2%
Phase error: +/- 1.25 degree
Chroma bandwidth: 700 kHz +/- 100 kHz
Variable gain range: -40 to +20%
Vector MAG: x 2.5 typical

NOISE
Unified weighting filter: < -70 dBm noise floor

AUDIO
Dynamic range: -60 dBFS with 1 dB resolution
Input level: Analog +20 dBm maximum, AES-3 800 mV

INTERFACES
Computer Interface: RS-232 control port (9-pin D-sub)
Modem Interface: RS-232 interface to modem for instrument control (9-pin D-sub)

POWER REQUIREMENTS
Line voltage: 100 to 240 V ac, 50/60 Hz, 100 VA max

MECHANICAL DIMENSIONS
2RU, H x W x D: 3.5" x 19" x 17", 90 mm x 483 mm x 432 mm
Weight 5.4 kg (12 lb)

OPERATING CONDITIONS
0 to 50 C
90% relative humidity

SAFETY STANDARDS
Tested to meet or exceed UL 1950, CSA 1402C, IEC 950. CE Certified.


                   

 
¸ñ·Ï