SDRS010 - BALBOX Serial Data Routing Switch 8 x 1 8개의 RS422 신호를 입력받아 1개의 출력으로 스위칭하는 장비 Local/GPI 컨트롤 입력 : 8 x RS422 출력 : 1 x RS422   SDRS010 - BALBOX Serial Data Routing Switch 8 x 1. The SDRS010 is an 8x1 switcher for RS422 data, typically for routing of remote panel and machine control data. The switcher will ensure that both Tx and Rx data is correctly routed between source and destination. The inputs and outputs are taken through a 50way D-type connector in view of the compact nature of the switcher. Breakout cables to 9-way sub-miniature D-type connectors are available. Local control may be through a small rotary switch to route one of the eight inputs to the output, or the unit may be controlled remotely with GPI signalling. The unit has an integral mains power supply. DATA PATHS No of sources: 8 No of destinations: 1 Signals: 4 wire Tx+/Tx-, Rx+/Rx- Receive sensitivity: 200mVp-p min, 7Vp-p max Transmit levels 3Vp-p across 110ohm Impedance: 110ohm CONTROLS A six position DIP switch controls selection of the following: Switch 1: Local/GPI control Switch 2-6: not used Rotary switch (0-7): local route selection GPI port: 9-way sub-miniature D-type socket INSTALLATION DATA Package: Standard BALBOX housing, with one 50way subminiature D-type socket and one 9-way sub-miniature D-type socket for GPI 190 x 103 x 42.4mm. Weight: 950g. Mains supply: 90 – 250Vac Consumption: <15VA