SVRS010 - BALBOX Serial Video Routing Switch 8 x 1 8개의 SDI입력을 받아 1개의 출력으로 스위칭하는 장비 Local/GPI 컨트롤 입력 : 8 x SDI 출력 : 1 x SDI     SVRS010 - BALBOX Serial Video Routing Switch 8 x 1. The SVRS010 is a simple 8x1 switcher for serial digital video signals. There are two SDI outputs. Automatic cable equalisation is provided on all inputs for up to 250m of Belden 8281 or similar quality coaxial cable. Local control may be through a small rotary switch to route one of the eight inputs to the output, or the unit may be controlled remotely with GPI signalling. The unit has an integral mains power supply. SDI INPUTS No. of inputs 8 Input signal: 270Mb/s serial NRZI to SMPTE RP250M and EBU Tech 3267 Impedance: 75ohm terminating Return loss: >15dB, 10MHz to 270MHz Input equalization: automatic up to 250m of Belden 8281 cable or similar SDI OUTPUTS No of outputs: 2, identical Output: 270 Mb/s serial NRZI to SMPTE RP259M and EBU Tech 3267 Impedance: 75ohm Return loss: >15dB, 10MHz to 270MHz Output level: 800mVp-p +/-20mV across 75ohm termination CONTROLS A six position DIP sets the operating mode: Switch 1: Local/GPI Control Switch 2-6: not used Rotary switch (0-7): local route selection GPI port: 9way sub-miniature D-type socket INDICATOR A green LED illuminates to indicate power on. INSTALLATION DATA Package: Standard BALBOX housing, with ten 75ohm BNC signal connectors and one 9 way sub-miniature D-type socket for GPI control Size: 190 x 103 x 42.4mm. Weight: 950g. Mains supply: 90 – 250Vac Consumption: <15VA