VSW 201

2°³ÀÇ Composite¸¦ ¹Þ¾Æ¼­ Çϳª¿¡ ¹®Á¦°¡ »ý°åÀ» °æ¿ì Á¤»óÀÇ ½ÅÈ£·Î ÀÚµ¿ ½ºÀ§ÄªÇÏ´Â Àåºñ
ÀÔ·Â : 2 x Composite
Ãâ·Â : 2 x Composite (Prog, Aux)  
Analogue Video 2x1 Emergency Switch

Cost effective emergency switching Automatic switching on signal loss
GPI switch control Power-fail bypass Vertical interval switching

The VSW201 is designed for applications requiring automatic
emergency switching capability in the event of signal loss. The
main program input in monitored and on loss of picture, the output
is switched to the secondary input.

If inputs are co-timed, switching in the VBI achieves a seamless changeover.

The automatic switching feature can overridden by the operator through external connection
to the GPI. A tally output indicates when the switch has occurred.

The program path is maintained, even in the event of a power failure, through the inbuilt
bypass relay.

Inputs:
2 x analogue composite video, 1V p-p. Terminated through 75R or high
impedance (link) referred to as input A (main) and B (secondary).

Outputs:
2 x analogue composite video, referred to as Program and Auxiliary output.
In the event of power failure to the unit a passive bypass relay connects input A
to the main program output. This can also be activated by a switch on the front
of the card.

Control:
In ¡°MANUAL¡± switch mode a closing contact to ground on the GPI input causes
a switch to input B.
In ¡°AUTO¡± switch mode the card will switch to input B when the video on input A
becomes invalid (loss or mis-aligned sync words for 2 fields). In Auto mode
switching can still be activated by the external GPI input.
A tally output is provided which indicates switch status.
On the 1U frame GPIs and tallies are wired to a 15 way high density ¡®D¡¯
connector and are included with the frame. On the 3U frame the -CB option is
required to provide the wiring of all card to two 25 way ¡®D¡¯ connectors.

Physical: Eurocard size module for mounting in our 1U or 3U frames.

Power usage: 5W.

Frames:
Up to 6 modules will fit in a Microvideo 1U frame and 14 in a 3U frame.
They may be mixed with other Microvideo Series 200 boards in the same
frame.

Ordering:
VSW201 2x1 analogue composite video emergency switch module.
EU-FRM1U 1U rack mounting frame for series 200 cards.
FL-FRM3U 3U rack mounting frame for series 200 cards.
-RP Redundant power supply (for both 1U and 3U frame, this option reduces
card capacity).
-CB Control Bus wiring for 3U frame.

Related products: ESW201, ESW201-B, ESW201-S, RSW204, ASW201
                   

 
¸ñ·Ï