SARS010 - BALBOX Digital Audio Routing Switch 8 x 1

AES/EBU ¿Àµð¿À½ÅÈ£ 8°³¸¦ ÀÔ·Â ¹Þ¾Æ 1°³ÀÇ Ãâ·ÂÀ¸·Î ½ºÀ§Äª ÇÏ´Â Àåºñ
Local/GPI ÄÁÆ®·Ñ
ÀÔ·Â : 8 x AES/EBU
Ãâ·Â : 1 x AES/EBU  
SARS010 - BALBOX Digital Audio Routing Switch 8 x 1.

The SARS010 is a simple 8x1 switcher for digital audio signals. The digital audio inputs and outputs are balanced, and are all taken through a 50way D-type connector due to the compact nature of the switcher. Breakout cables with XLR connectors are available. Local control may be through a small rotary switch to route one of the eight inputs to the output, or the unit may be controlled remotely with GPI signalling. The unit has an integral mains power supply.


AES/EBU INPUTS
No. of inputs: 8
Input signal: Balanced digital audio to AES3-1992, EBU Tech 3250
Audio sampling: 24-bit max, sampling rates up to 48kHz
Input levels: 200mVp-p min, 7Vp-p max
Impedance: 110ohm terminating on all inputs

AES/EBU OUTPUT
No of outputs: 1
Output signal: Balanced digital audio to AES3-1992, EBU Tech 3250
Output level: 3Vp-p across 110ohm resistor
Impedance: 110ohm, transformer coupled

CONTROLS
A six position DIP switch sets the operating mode:
Switch 1: Local/GPI Control
Switch 2-6: not used
Rotary switch (0-7): local route selection
GPI port: 9way sub-miniature D-type socket

INDICATOR
A green LED illuminates to indicate power on.

INSTALLATION DATA
Package: Standard BALBOX housing, with one 50way subminiature D-type socket and
one 9 way sub-miniature D-type socket for GPI control
190 x 103 x 42.4mm.
Weight: 950g.
Mains supply: 90 – 250Vac
Consumption: <15VA



BALBOX Breakout Cable for SARS010.
 
SARS010BC001 - BALBOX Breakout Cable for SARS010.

Breakout Cable for SARS010 with one XLR male output and eight XLR female inputs on 1m of cable.

                   

 
¸ñ·Ï