SADA020 - BALBOX Digital Audio Distribution Amplifier with Audio Delay Audio Delay기능이 탑재된 AES/EBU 신호 8분배 장비 Audio Delay 0 - 500 ms 10ms단위 조작 GPI 컨트롤 입력 : 1 x AES/EBU 출력 : 8 x AES/EBU   SADA020 - BALBOX Digital Audio Distribution Amplifier with Audio Delay The SADA020 is an AES/EBU digital audio distribution amplifier which incorporates programmable audio delay of up to 500ms. It is designed to overcome lip-sync problems which occur when video signals undergo significant processing in synchronizers and coders and in the use of large flat panel displays. The delay may be set manually or through GPI signals, and the delay setting is held in non-volatile memory. Delay step size is 10ms. Digital audio inputs and outputs are transformer balanced, and are all taken through a 50way D-type connector due to the compact nature of the amplifier. Breakout cables with XLR connectors are available. INPUT Input signal: Balanced digital audio to AES3-1992, EBU Tech 3250 Audio sampling: 24-bit max, sampling rates up to 48kHz Input levels: 200mVp-p min, 7Vp-p max Impedance: 110ohm terminating on all inputs AES/EBU OUTPUTS No of outputs: 8 Output signal: Balanced digital audio to AES3-1992, EBU Tech 3250 Output level: 3Vp-p across 110ohm resistor Impedance: 110ohm, transformer coupled AUDIO DELAY Delay range: 0 to 500ms Delay step size: 10ms INDICATOR A green LED indicates power on CONTROLS Control mode: Local/remote selected by DIP switch Local control: Rotary control Remote control: By momentary closure GPI signals through 9 way D type connector INSTALLATION DATA Package: Standard BALBOX housing, with one 50way sub-miniature D-type socket for audio connections and one 9way D-type socket for GPI control 184 x 103 x 42.4mm. Weight: 950g. Mains supply: 90 – 250Vac Consumption: <15VA   SADA010BC001 - BALBOX Breakout Cable for SADA010 and SADA020 Breakout Cable for SADA010 with one XLR female input and eight XLR male output connectors on 1m of cable