SDA-ASI 1°³ÀÇ ASI-DVB¸¦ ÀÔ·Â¹Þ¾Æ 4°³·Î Ãâ·ÂÇÏ´Â Àåºñ ÀÔ·Â : 1 x ASI-DVB Ãâ·Â : 4 x ASI-DVB Reclocking of Serial Digital Video All data rates - 143, 177, 270 and 360Mb/s Auto detection of data rate Support for ASI-DVB Up to four outputs As part of our Series 200 range Microvideo offer basic distribution amp modules. These are reclocking distribution amps. The have equalisation for up to 300M of high quality co-ax cable (eg. Belden 8281). The SDA-ASI module has been produced to support both Serial digital video (270Mb/s as per SMPTE 259M) and ASI-DVB data at 270Mb/s. The card are part of the Series 200 and can be mixed in our 1U or 3U frames with other cards in the range. Input: Serial digital video of all current data rates - 143, 177, 270 and 360 Mb/s Input has equalisation for up to 300m of cable Tested throughly with 270Mb/s serial digital component video to EBU Tech. 3267-E, (SMPTE 259M) and ASI-DVB. Outputs: Equalised and reclocked serial output(s) for SDV (270Mb/s). Output Level : 800mV pp into 75R, DC offset <500mV Additive jitter <250pS Adjustments: None needed for setup or maintance. On board links allow for manual setting of the data rate frequency This over-rides the auto detection feature. Power : Both cards consume <2W Physical: Eurocard size module (220x100mm) for mounting in Microvideo's 1U and 3U FRAMES. All inputs / outputs are via a DIN41612 connnector except the SDV in which utilises a 75ohm SMB connector to guarantee performance at long cable lengths. Ordering information: SDA-ASISerial Digital DA module for SDV/ASI , 4 reclocked digital o/p |