|
|
Digital 50 III
디지털 비디오, 아날로그 비디오를 입력 받아 synchronizing 하는 장비
디지털 신호를 아날로그 신호로 아날로그 신호를 디지털 신호로 transcode 가능
모든 입력에 Proc Amp, Composite와 Component 입력에 Time Base Correction
NTSC/PAL 지원, 525/626 자동 디텍팅, RS-232 컨트롤 가능, SDI 270Mb/S 지원
입력 : SDI, Composite, Component
출력 : SDI, Composite, Component
전원 : 96 - 132 or 185 - 263 VAC, 50 or 60 Hz
- TBC / Synchronizer
- Works 24/7/52/365
This latest Time Base Corrector / Video Synchronizer is a refinement of our workhorse Model 50 II - one of the most reliable, popular TBC/Sync devices ever. The Digital 50 III is on the job and active all the time, synchronizing digital video, and correcting and synchronizing analog video. And it transcodes.
Three inputs allow you to mix and match D1, or analog component or composite. And it includes proc amp controls on all inputs. All outputs are active for any type of input. Plus, you can freeze either field or a frame.
The Digital 50III works in both NTSC and PAL standards.
Features:
 |
Proc Amp on all inputs. |
|
By-pass for all inputs from front panel or upon loss of power. |
|
Time Base Correction for composite and component inputs. |
|
All outputs available for all input types (transcodes). |
|
Component level inputs and outputs selectable between SMPTE/EBU and Beta. |
|
Full-time or selectable composite color bar generator. (Uses composite output) |
|
Freeze field 1, field 2 or frame |
|
NTSC and PAL |
VIDEO
SERIAL DIGITAL I/O
| Input |
SDI (270 Mb/S Component Serial) SMPTE 259M-C |
75 Ohm, BNC |
| Buffered Preview Output |
Equalized, Relocked SDI |
75 Ohm, BNC |
| Output |
SDI (270 Mb/S Component Serial Digital) |
75 Ohm, BNC |
| External Reference input |
300 mVpp, Black Burst |
Hi-Z looping, BNC |
SERIAL DIGITAL SPECIFICATIONS
| Signal Level |
800 mVpp (nominal) |
| Equalization |
Auto to 350 meters (8281) |
| Quantizing |
10 Bits |
| Format |
4:3, 525/625 |
ANALOG COMPONENT I/O
| Input |
Y |
1 Vpp (including sync) |
75 Ohm, BNC |
| |
(R-Y) |
525 mVpp or 700 mVpp |
75 Ohm, BNC |
| |
(B-Y) |
525 mVpp or 700 mVpp |
75 Ohm, BNC |
| |
|
|
|
| Output |
Y |
1 Vpp (including sync) |
75 Ohm, BNC |
| |
(R-Y) |
525 mVpp or 700 mVpp |
75 Ohm, BNC |
| |
(B-Y) |
525 mVpp or 700 mVpp |
75 Ohm, BNC |
ANALOG COMPONENT / SPECIFICATIONS
| Sampling |
13.5 MHz (luma) 6.75 MHz (color) |
| Quantizing |
10 Bits Luma, 10 Bits color |
| Bandwidth |
6 MHz (luma) 3 MHz (color) |
| K-Factor (2T) |
< 1 percent |
| S/N Ratio |
> 65 dB (weighted, 10KHz to 5 MHz) |
| Format |
525 line, 625 line |
ANALOG COMPOSITE I/O
| Input |
Composite |
1 Vpp (including sync) |
75 Ohm, BNC |
| Output |
Composite |
1 Vpp (including sync) |
75 Ohm, BNC |
ANALOG COMPOSITE SPECIFICATIONS
| Sampling |
13.5 MHz. 4:2:2 |
| Quantizing |
10 Bits Luma, 10 Bits color |
| Bandwidth |
5.5 mhZ |
| K-Factor (2T) |
< 1% |
| Diff Phase |
< 1% |
| Diff. Gain |
< 1% |
| Y/C Delay Error |
< 10 nS |
| S/N Ratio |
> 65 dB (weighted, 10KHz to 5 MHz) |
| Format |
525 line, 625 line (NTSC, PAL) |
OPERATIONAL CONTROLS
| Video Level |
+/- 6 dB |
| Color Level |
No Color to +6dB |
| Setup Level |
+/- 10 IRE |
| Hue (NTSC Only) |
+/- 45 degrees |
| H-Phase Adjust |
> +/- 2 uS |
| Subcarrier Adjust |
> 360 degrees |
ENVIRONMENTAL
| Operating Temperature |
+32 F (0 C) to 113 F (45 C) |
| Operating Humidity |
10% to 95% RH, Non Condensing |
| Power Supply |
96-132 or 185-264 VAC, Autoranging |
| Power Dissipation |
25 Watts Max |
| Height |
1U 1.75 inches (4.44 cm) |
| Length |
19 Inches (48.3 cm) |
| Depth |
12.5 inches (31.8 cm) |
| Weight |
11 lbs (5 kg) |
|
|
|
