|
|

Single channel TBC/SYNC - 50 II
TBC/Synchronizer Composite, Y/C ÀÔ·ÂÀÇ TBC/ Synchronizer. NTSC/PAL °â¿ë. Freeze Frame/Field. Video, Color, Set-Up, Hue level Á¶Á¤°¡´É. 1U ÀÔ·Â : Composite, Y/C Ãâ·Â : Composite, Y/C
Time Base Corrector TBC Synchronizer
MODEL 50II
Time Base Corrector / Synchronizer - NTSC, PAL, or PAL-M
The Prime Image Model 50II is a high-quality, multi-featured TBC/synchronizer that is ideally suited to a wide variety of video production applications. In addition to offering full transcoding of composite and component signals in and out, the Model 50II provides full proc amp controls and many extra features usually found in units costing considerably more. For example the Model 50II offers automatic gain control (AGC on/off) horizontal position, vertical color advance (1,2 or 3 lines), horizontal chroma-to-luma adjustments, three levels of detail enhancement, variable rate strobe, and ultra-stable freeze (frame or field). Options are available for 3-way adaptive comb filtering and 3/4" U-Matic Hi or Lo band component input.
The Model 50II carries Prime Image's full 3-year warranty which includes free 2-way air express shipping within the continental United States.
Features:
 |
Choose AC or DC Power
|
 |
Hot Switch
|
 |
Composite and Y/C in and out
|
 |
Transcode Composite and Component Inputs to all Outputs
|
 |
Inputs may be Synchronous or Non-Synchronous
|
 |
Works with all VCRs
|
 |
Full Proc Amp Controls
|
 |
AGC On/Off
|
 |
Vertical Color Advance - 1,2 or 3 Lines
|
 |
Horizontal Chroma-to Luma Adjust
|
 |
Detail Enhancement
|
 |
Freeze Frame/Field
|
 |
Variable Rate Strobe
|
 |
3-Way Adaptive Digital Comb Filter Option
|
 |
3/4" U-Matic Hi and Lo Band Component Input Option
|
 |
High Performance - Low Cost |
INTERFACE
|
Inputs |
Video (Composite) |
1.0 Vpp, 75 Ohm, BNC |
|
|
Y/C (S-Video) |
4-Pin |
|
|
3/4 DUB Cable* |
-C Cable, Option |
|
Outputs |
Video (Composite) |
1.0 Vpp 75 Ohm, BNC |
|
|
Y/C (S-Video) |
4-Pin |
|
Genlock in |
|
High Impedance, Looping, 2 BNCs |
|
RS232 Interface |
|
25-Pin D, Option | Transcodes Y/C and Composite to Y/C and Composite.
PERFORMANCE
|
Window |
625 Line, PAL; 525 Line, NTSC or PAL-M |
|
Bandwidth |
5.5 MHz |
|
Signal to Noise Ratio |
58dB |
|
Differential Phase |
1 degree |
|
Differential Gain |
1 percent |
|
K-Factor (2T) |
1 percent |
|
Sampling |
8 Bit Luma / 8 Bit Chroma (CCIR-601, 4:2:2) |
|
Residual Time Base Error |
+/- 15 nsec. |
|
Composite Auto Bypass |
If AC Power or Power Supply Fails |
OPERATIONAL CONTROLS AND INDICATORS
|
Input Selector |
Composite or Y/C |
|
Freeze Switch |
Off / Field / Frame |
|
Strobe |
Field or Frame, Variable Rate |
|
Enhance Switch |
Normal / High / Low |
|
AGC |
On / Off |
|
Video Level Control |
+/- 6 dB |
|
Color Level Control |
+/- 6 dB |
|
Set-up Level Control |
+/- 10 IRE |
|
Hue (NTSC Only) |
+/- 45 degrees |
|
V-Color Advance |
1, 2 or 3 Lines |
|
H-Chroma / Luma Adjust |
+/- 1 usec. |
|
H-Position |
+/- 2 usec. |
|
Go To Black & White |
On / Off |
|
H-Phase Adjust |
+/- 1 usec. |
|
Burst Phase Adjust |
+ 360 degrees |
|
Genlock Indicator |
LED (Green) |
|
Power On Indicator |
LED (Red) |
ENVIRONMENTAL
|
Operating Temperature |
+32 F (0 C) to 113 F (45 C) |
|
Operating Humidity |
10% to 95% RH, Non-Condensing |
|
Power Supply |
117 or 220 VAC, +/- 10%, 50 or 60 Hz.
DC Option: 12,24,36 or 48 V +/- 25% |
|
Power Dissipation |
15 Watts |
|
Height |
1.75 in. (4.45 cm) |
|
Width |
19 in. (48.3 cm) |
|
Depth |
15 in. (38.1 cm) |
|
Weight |
15 lbs. (6.8 kg) |
OPTIONS
|
"E" |
3-Way Adaptive Digital Comb Filter Option |
|
232 |
RS232 Interface Option |
|
C |
High Performance 3/4 DUB Cable Option |
|
AC/DC |
Specify AC or DC Power |
|
-H |
Hot Switch (Auto Freeze) |
|
R-1 |
Hand Held Remote Control |
|
R-2 |
Rack Mountable Remote Control |
|
|
|