INS-VITC

Vertical Interval Time Code¿Í User bit¸¦ SDI¿¡ »ðÀÔÇØ ÁÖ´Â Àåºñ
ÀÔ·Â : 1 x SDI
Ãâ·Â : 2 x SDI  
Time Code Inserter - Generator for D1 Digital Video

This unit allows the insertion of Vertical Interval Time Code (VITC) and user bits into a D1 Digital Video Source.
The Time-code can be from a Linear Time Code (LTC) input, with an adjustable offset, or can be generated
internally. When generated internally it takes it timing from the input video. Source Ident (four ASCII characters)
can be put into the 'User Bits' either by selection from the front panel, or by external data input. When the
timecode is being read from the LTC input the user bits can be passed through or amended. Time code can be
inserted into 625 and 525 line standards and accordingly provision has been made for both non-drop frame and
drop frame time code generation.

The data path through the unit is 10 bit, and transparent for the Digital Video input. Vertical blanking controls
allow the unused lines to be blanked, or transparent.

The Time Code Inserter is available as a standalone product, housed in a 1U rack mounting frame, or as an
option on other inserters from the Microvideo range.

Inputs:
Serial Digital Video (270Mb/s) to EBU Tech 3267-E and SMPTE 259M
Linear Time Code on phono socket to IEC461:1986

Outputs:
2 x Serial Digital Video (270Mb/s) to EBU Tech 3267-E and SMPTE 259M
with inserted VITC. Main output has power fail bypass

Physical: The Inserter unit is in a 1U case, 400mm deep.
                   

 
¸ñ·Ï