|
NPROC-3
SDI ÀÔ·ÂÀ» ¹Þ¾Æ video gain, level µîÀ» ó¸®ÇÏ´Â Àåºñ µðÁöÅÐ ºñµð¿À ·¹º§ Á¶Á¤ Gamut Çȼ¿ Ç¥½Ã,¼öÁ¤ ÀÔ·Â : SDI Ãâ·Â : SDI DIGITAL PROC AMP : NPROC-3
Full control of Digital Video levels Shows Out of Gamut Pixels Corrects Out of Gamut Pixels Split Screen Mode Front Panel or Remote Control
The NPROC-3 offers a full set of controls for adjustment of video gains and levels. With its additional features it provides an ideal digital tool box for dealing with problems on incoming video feeds or preventing them on your outgoing tapes or broadcasts.
Controls Full adjustment of all the video levels is available - Video gain Chroma gain Y gain U gain V gain Black Level Y/C delay Hue control U pedestal V pedestal
Display illegal This colours the out of range pixels bright pink so that it is immediately clear what areas of the screen are illegal.
Correct illegal When enabled, a processing engine looks at each pixel and decides if it is out of gamut. If it is, a calculation is made of how much correction should be applied to bring the colour back into the RGB colour space. This means that when the signal is coded to PAL or NTSC it will always remain legal. Split Screen Shows a horizontal split of the picture, with processed picture in one half and the original source in other.
Window select Allows the user to define a window on the screen within which the corrections are carried out. All areas outside window are not changed.
Y/C Limit Restricting the luma (Y) to digital values between 16 and 235 and Chroma (C) to -112 to +112, clipping of below black and above white spikes. Additional menus allow adjustment of these upper and lower limits.
H cropping This allows the Horizontal edges of the picture to be cropped. e.g for analogue line blanking.
V blanking This enables the Vertical edges of the picture to be cropped, allowing letter box blanking.
VBI Line blank Individual Lines in the VBI can blanked to removed timecode, teletext, etc.
No input detect If enabled the unit can generates a black screen if the program input fails.
EDH Error Count Detects and counts EDH input errors (as per SMPTE RP165).
Memory Select Recalls up to 16 different setups.
|
|
|