SVMV010 - BALBOX SDI Quad Split 4개의 SDI를 입력받아 하나의 화면에 분할하여 출력하는 장비 Component 출력 지원 Local/GPI 컨트롤 입력 : 4 x SDI 출력 : 2 x SDI, 1 x Component   SVMV010 - BALBOX SDI Quad Split. The SVMV010 offers a low cost, compact solution to monitoring multiple serial digital video signals. The unit accepts four independent serial digital video signals and combines them into a quad display, thus reducing the number of monitor required from four to one. Each input can also be viewed in full screen mode. The unit accepts both synchronous and asynchronous inputs. Outputs are synchronized to either a genlock input or SDI input 1, depending on the preference of the user. The unit provides both serial digital video outputs and analogue component outputs. To aid channel identification, simple channel idents are provided, which can be enabled/disabled by the used. There is also an on-air indicator, which is controlled via GPI (quad display only). The unit has an integral mains power supply. SIGNAL INPUTS Input signals: 270 Mb/s serial digital video to SMPTE RP259M Cable equalization: up to 130m of Belden 8281 coaxial cable or similar Input connectors: BNC socket SDI OUTPUTS Number of outputs: 2 Output: 270 Mb/s serial digital video to SMPTE RP259M Impedance: 75ohm Output level 800mV p-p +/-20mV across 75ohm termination CONTROL Dip switches: SDI input 1 / Genlock synchronization Idents on / Idents off Local control / GPI control Rotary controls: Position 0 – quad display mode Position 1 – SDI input 1 full screen Position 2 – SDI input 2 full screen Position 3 – SDI input 3 full screen Position 4 – SDI input 4 full screen All other positions – N/A INDICATORS LED 1: Power LED 2: Status INSTALLATION DATA Package: Standard BALBOX housing with 10 BNC signal connectors and one 9-way D-type socket for GPI control Size: 184 x 103 x 42.4mm Weight: 950g. Mains supply: 90-250 Vac Consumption: <15VA ANALOGUE VIDEO OUTPUTS Parameter Y / G Pb / B Pr / R Resolution 10-bit 10-bit 10-bit Amplitude 700mV ± 1% 700mV ± 1% 700mV ± 1% Noise >75dB >75dB >75dB