Table Mount Video + Audio Line Driver (DA3000TM)

Composite video ¿Í Stereo audio¸¦ ÀÔ·Â ¹Þ´Â ¶óÀεå¶óÀ̹ö
NTSC, PAL, SECAM formats ȣȯ
ÀÔ·Â : Composite, Stereo Audio (3-RCA)
Ãâ·Â : 2-pin Terminal Block, 5-pin Terminal Block (L+, L-, GND, R+, R-)
Àü¿ø : 9V 500mA ¾îµªÅÍ (Æ÷ÇÔ)  

Table Mount Video + Audio Line Driver (DA3000TM)

DA3000TM

  • Mounts easily to table bottom
  • Video & stereo audio input (3-RCA connectors)
  • Buffered video & audio outputs on back panel
  • Operates on low voltage power
  • Super compact all metal enclosure
  •            No power adapter Included

The DA3000TM is a composite video + stereo audio line driver designed for mounting under a table or to other surfaces in tight spots. Its extremely compact form promotes inconspicuous attachment, yet still allows for active components necessary to drive signals over long cable runs.

This unit offers three female RCA type connectors on its front panel. The yellow RCA passes composite video signals; the red and white RCA¡¯s pass right and left stereo audio respectively. The rear panel offers three terminal block connectors for the connection of video, balanced stereo audio and low voltage power (9V DC).

The DA3000TM is capable of accepting composite video signals in standard NTSC, PAL or SECAM formats. The output is fully buffered and amplified. Also, the DA3000TM converts an incoming unbalanced stereo audio signal to balanced stereo audio on the output.

ALTINEX offers optional adhesive A/V label sheets, allowing the inputs to be labeled as needed. All accessories, including the power adapter, must be ordered separately.

Application Diagram

Technical Specifications

GENERAL

Input
Video: Female RCA (Yellow)
Audio: (2) Female RCAs (Red, White)

Output
Video: 2-pin Terminal Block
Audio: 5-pin Terminal Block (L+, L-, GND, R+, R-)

Compatibility
Composite Video: (NTSC, PAL, SECAM) and Stereo Audio

 

MECHANICAL

Width: 1.5 in; 39 mm
Height: 4.1 in; 105 mm
Depth: 2.1 in; 54 mm
Weight: 1.0 lb.; 0.45 kg
Ship Weight: 1.6 lb.; 0.73 kg
Material: Steel
Finish: Black
T¡Æ Operating: 10¡ÆC to 35¡ÆC
T¡Æ Storage: 10¡ÆC to 50¡ÆC
Humidity: 90% non-condensing
MTBF (calc.): 40,000 hrs

ELECTRICAL

Input Video Signal
Analog: 1.5V Max.
Impedance: 75 ohms +/- 1% (Terminated)

Output Video Signal
Analog: 1.5V p-p Max (Terminated)
Impedance: 75 ohms

Audio Input
Impedance: 10k ohms
Max Level: 0 dBu

Audio Throughput
Gain: +6 dB balanced, 0 dB unbalanced
Frequency Response: 10 Hz to 20 kHz (+/- 0.05 dB)
Noise Floor: -98 dB @ 20 kHz
CMRR: <40 dB, 10 Hz to 20 kHz

Power: 9VDC to 500Ma
Power Consumption: 1.0-watt max.
Power Connector: 2 pin terminal block

 

OPTIONAL ACCESSORIES

PS5503US: 9V to 500mA U.S. Power Adapter with 50 ft cable
PS5581SM: Rack-mount Power Supply
MS8301LB: Input/output label sheet (white text on black)

 


                        â´Ý±â