Designed to handle the new DVI (Digital Visual Interface) digital computer video standard, the DA1001DV accepts a single DVI-D (digital only) input and provides two simultaneous DVI-D outputs. The DVI standard is becoming quite common on many digital flat panel displays and projection systems and provides superior image quality because it eliminates the typical signal degradation caused by digital to analog and analog to digital conversion.
The DA1001DV offers a "single link," making it compatible with VGA thru SXGA signal resolutions and UXGA at 60 Hz refresh rate. The DVI standard presents a cable length limitation of approximately 12 feet. Although each output of the DA1001DV is buffered, this distance limitation still applies on the output. The total system length (including the input cable) is limited to approximately 25 feet.
In addition to passing DVI-D type signals, the DA1001DV also passes stereo audio signals, providing a 3.5mm stereo mini input jack, a 3.5mm local monitor jack, and a balanced stereo audio output on a 5 pin terminal block.
To connect the DA1001DV to the computer and displays, ALTINEX offers both male to male DVI-D cables and DVI-D + Audio Cables in lengths of 3, 6 and 12 feet.
|