1-In 2-Out VGA D.A. (Ditto-Amp: DA1907SX)

한 개의 VGA를 입력 받아서 2개로 출력하는 장비
어뎁터를 사용하여 RGBHV, RGBS, RGsB, RsGsBs 도 사용가능
입력 : VGA x 1
출력 : VGA x 2
전원 : 9V 500mA 어뎁터 (포함)  

1-In 2-Out VGA Distribution Amplifier (DA1907SX)

DA1907SX
  • Two Buffered Outputs
  • Ideal for use with LCD/DLP Projectors
  • Comes with 3-foot Male to Male VGA Input Cable
  • Ultra Compact Design
  • Solid Metal Enclosure
  • External Power Supply (9V 500mA) Included
  • Includes: (1) power adapter, 3 ft/0.9m male-to-male VGA cable

The Ditto-Amp™, part # DA1907SX, is a high resolution 1-In 2-Out VGA (VGA thru UXGA) distribution amplifier designed to simultaneously feed a local monitor and a distant monitor or projector. It can also distribute RGBHV, RGBS, RGsB and RsGsBs signal formats if proper adapter cables are used. The power LED doubles as an input signal indicator, for easy troubleshooting.

The Ditto-Amp is ideal for use with LCD/DLP projectors and other displays that utilize a 15-pin HD (VGA-type) input connector. The local monitor output is aligned for optimal performance up to approximately 12 feet, while the main output is aligned for optimal performance at 75 feet, but is capable of driving a computer video signal as far as 250 feet, depending on the signal resolution and cable quality.

Includes: external 9V power supply, 3 foot male to male VGA cable.

Panels

Application Diagram

Technical Specifications

GENERAL

Input: 15-pin HD Female
Outputs: Local Monitor: 15-pin HD Female
Main Output: 15-pin HD Female

Compatibility
VGA thru UXGA. May also be used to pass high res. RGBHV, RGBS, RGsB, and RsGsBs format signals (may require connector adaptation).

 

MECHANICAL

Width: 4.50 in; 114 mm
Height: 3.00 in; 76 mm
Depth: 1.00 in; 25 mm
Weight: 0.4 lb.; 0.18 kg
Ship Weight: 2.4 lb.; 1.09 kg
Material: 0.1" Al
Finish: Gray
Top panel: Lexan
T° Operating: 10°C to 35°C
T° Maximum: 50°C
Humidity: 90% non-condensing
MTBF (calc.): 40,000 hrs

ELECTRICAL

Input Video Signal
Analog: -1.5V to 1.5V (1.5V p-p max.)
Impedance: 75 ohms

Input Sync Signal
Horiz., Vert. & C-Sync: TTL (+/-)
Sync on Green: -0.3 V
Impedance: 10k ohms

Output Video Signal
Analog: Gain of 1.05 (+/-5%)
Fall/Rise Time: 1.0 ns
Impedance: 75 ohms

Output Sync Signal
Horiz., Vert. & C-Sync: TTL (+/-)
Sync on Green: -0.3 V
Impedance: 22 ohms

Frequency Compatibility
Horizontal: 15 to 200 kHz
Vertical: 47 to 180 Hz
Bandwidth: 400 MHz @ -3dB

Cable Equalization: 6dB at 180 MHz (Main Output)
Coupling: DC
Cross-talk: -40dB @ 10 MHz
Power: 9V to 500mA external adapter (incl.)
Power Consumption: 4 watts Max.

 

OPTIONAL ACCESSORIES

MB1001: "L" Shaped Brackets

 


                        창닫기