DAA0106-V0A2: 1-In 6-Out Stereo Audio Distribution Amplifier

1°³ÀÇ Stereo Audio¸¦ ÀÔ·Â ¹Þ¾Æ 6°³·Î ºÐ¹è½ÃÅ°´Â Àåºñ
ÀÔ·Â : 5-pin Terminal Block: L+, L-, GND, R+, R-
Ãâ·Â : 5-pin Terminal Block: L+, L-, GND, R+, R-
Àü¿ø : AC 90-240V  

DAA0106-V0A2: 1-In 6-Out Stereo Audio Distribution Amplifier


DAA0106-V0A2

Click on photo for larger image

  • Stereo or mono audio

  • Balanced or unbalanced inputs/outputs

  • Loop-able Input (600 ohm/Hi-Z termination switch)

  • Individually isolated and amplified outputs

  • 1U high, 1/2 rack wide

             Includes: (1) power cord

The DAA0106-V0A2 is a 1-In 6-Out stereo audio distribution amplifier. Each input and output connection is made on a 5-pin terminal block connector. The DAA0106-V0A2 can be used to pass balanced or unbalanced signals. If the input is unbalanced, any of the outputs can be unbalanced or balanced.

The input of the DAA0106-V0A2 has a switch that can be set to 600 ohms or High Z. The input is loop-able, allowing for easy expansion using additional distribution amplifier units.

Offering a universal internal power supply, the DAA0106-V0A2 is rack-mountable in a 1U high, 1/2-rack space using optional hardware.

Application Diagram

Panels

Front Panel

Back Panel

Technical Specifications

General

Input:
(1) 5-pin Terminal Block: L+, L-, GND, R+, R-

Outputs:
(6) 5-pin Terminal Blocks: L+, L-, GND, R+, R-

Compatibility:
Balanced or Unbalanced Stereo or Mono Audio

 

Mechanical
Width: 8.50 in; 216 mm
Height: 1.75 in; 44 mm
Depth: 4.73 in; 121 mm
Weight: 2.0 lb; 0.91 kg
Ship Weight: 3.2 lb; 1.45 kg
Material: 0.1" Al
Finish: Gray
Front/Back Panels: Lexan Overlay
T?Operating: 10캜 to 50캜
T?Maximum: 50캜
Humidity: 0 to 50% non-condensing
MTBF (calc.): 40,000 hrs

Electrical

Audio Input:
Impedance: 600 ohms (Terminated), 10k ohms (Unterminated)

Balanced or Unbalanced
Max Level: 20 dBu Balanced or Unbalanced

Audio Throughput:
Gain: +6 dB Balanced, 0 dB Unbalanced
Frequency Response: 10 Hz to 20 kHz (+/-0.05 dB)
Noise Floor: -100 dB @ 20 kHz
Stereo Channel Separation: >100 dB @ 20 kHz
CMRR: >80 dB, 10 Hz to 20 kHz

Audio Output:
Impedance: 50 ohms (unbalanced), 100 ohms (balanced)
Drive (with Hi-Z Input): >20 dBu, balanced or unbalanced
Drive (with 600ohm Input): >10 dBu, balanced or unbalanced

Power: 95 to 240V Continuous
Power Consumption: 10 watts max.

Optional Accessories
DA1294FC: Rack ears for single unit
DA1293FC: Rack shelf for two units side-by-side
TM1271: Table Mount Bracket


                   

 
¸ñ·Ï