The DA1916SX is a 2-In 1-Out VGA (SVGA/XGA/SXGA) Auto Switcher with manual remote capability through the use of a contact closure.
The DA1916SX automatically switches to the active input source by sensing an incoming signal. If two input signals are active simultaneously, the DA1916SX will default to Input 2.
The DA1916SX offers both a Main Output for the selected source and a Loop Output that always passes through Input 1, regardless of which input is selected. The Main Output is fully buffered. The Loop output is not buffered and, if it is not used, it must be terminated with a 75 ohm VGA termination plug (part # MS8000TP) which is supplied with the unit.
The DA1916SX can be controlled manually by connecting a latching contact closure control to its 2.5-mm mini-coaxial remote control jack. The DA1916SX comes with a small switch (part # RC5203CC) which performs this function, or the contact closure may be made from a control system. When the contact closure control is connected to the DA1916SX, an "open" position will select Input 1 and a "closed" position will select Input 2.
The DA1916SX is perfect for applications that make use of wall or floor plates for auto-switching. It may be mounted to furniture or other suitable surfaces using optional hardware.
|