Chassis for all kinds of Board - 10X-II

아래에 나와있는 Board중 원하는 것 10가지를 장착하여 사용 할 수 있는 샤시
최대 10개의 보드 장착가능. 3U.
Genlock In 1, 2  
 

 

Broadcast Video Main Frame, Chassis

Time Base Correctors, Synchronizers, Audio Delay, Standards Converters, Logo Insertion and more

Model # 10X-II

 

A Place for All Kinds of Stuff

10 Channel Mainframe for a Variety of Prime Image Boards

The Multi-II has room for all kinds of digital video / audio signal processing equipment.

Mix and match as many as 10 cards for any combination you require for time-base correction, standards conversion, frame synchronization, logo insertion, transcoding, signal distribution / amplification, switching and audio delay. NTSC, PAL and PAL-M standards can be accomodated simultaneously or independently.

The Multi-II is fully self contained, with professional easy access to the cards through the front panel. Menu-driven control on the front panel is standard, remote control is optional. Genlock, RS-232 port, and proc amp controls are standard.

 

INTERFACE

Genlock in # 1 & # 2

Both are independently selectable for each channel, High Impedance, Looping, 2 BNC (each)

Monitor Out

1.0 Vpp, 75 Ohm, BNC (Observe Selected Video Channel 1 - 10)

RS-232 Interface Port

25-Pin D Connector

Remote Port

5-Pin Connector

 

OPERATIONAL CONTROLS

A full set of operational controls is specified for each board.

 

ENVIROMENTAL

Operating Temperature

+32 F (0C) to 113 F (45 C)

Operating Humidity

10% to 95% RH, Non-Condensing

Power Source

117 VAC +/- 10% 60 Hz or 220 VAC, +/- 10% 50 Hz or 60 Hz

Power Dissipation

150 Watts max.

Height

3U, 5.25 in. (13.34 cm)

Length

19 inches (48.3 cm)

Depth

15 inches (38.1 cm)

Weight

30 lbs (13.6 kg) empty; add 14 oz. (0.42 kg) per board added

OPTIONS

R-1

Hand held remote control

R2

Rack mount remote control



                        창닫기