Chassis for all kinds of Board - PICK-2
¾Æ·¡¿¡ ³ª¿ÍÀÖ´Â Board Áß µÎ °¡ÁöÀÇ º¸µå¸¦ ÀåÂøÇÒ ¼ö ÀÖ´Â »þ½Ã.
ÃÖ´ë 2°³ÀÇ º¸µå ÀåÂø°¡´É. 1U. Genlock In 1, 2
Pick-2
The Pick-2 has room for all kinds of digital video / audio signal processing equipment.
Mix and match any two cards for any combination you require for time base correction, standards conversion, frame synchronization, logo insertion, audio delay, distribution amplifier, routing switcher, and 6 types of transcoders. NTSC, PAL and PAL-M signals can be accommodated simultaneously or independently.
The Pick-2 is fully self contained, with professional easy access o the cards through the front panel. Menu-driven control on the front panel is standard, remote control is optional. Genlock, RS232 port, and proc amp controls are standard.
The Pick-2 is the only product of its kind. It gives you maximum flexibility in signal processing in a minimum amount of space and for a minimum investment. Whether you're in broadcast, cable, or production the Pick-2 can work for you. The Pick-2 chassis is forward compatible to accept additional types of boards as they become available. For complete technical specifications, refer to the spec sheets on the cards and options available.
INTERFACE
Genlock in # 1 & # 2 |
Both are independently selectable for each channel, High Impedance, Looping, 2 BNC (each) |
Monitor Out |
1.0 Vpp, 75 Ohm, BNC (Observe Selected Video) |
RS-232 Interface Port |
25 Pin D Connector |
Remote Port |
5-Pin Connector |
OPERATIONAL CONTROLS
A full set of operational controls is specified for each board.
ENVIROMENTAL
Operating Temperature |
+32 F (0 C) to 113 F (45 C) |
Operating Humidity |
10% to 95% RH, Non-Condensing |
Power Source |
117 VAC +/- 10% 60 Hz or 220 VAC, +/- 10% 50Hz or 60 Hz |
Power Dissipation |
25 Watts max. |
Height |
1U, 1.75 in. (4.45 cm) |
Length |
19 inches (48.3 cm) |
Depth |
15 inches (38.1 cm) |
Weight |
13 lbs (5.9 kg) |
OPTIONS
R-1 |
Hand Held Remote Control |
R-2 |
Rack Mount Remote Control |