
Dual Channel Time Base Corrector TBC Synchronizer - 2X
Dual TBC/Synchronizer Composite, Y/C ÀÔ·ÂÀÇ TBC/ Synchronizer. NTSC/PAL °â¿ë. Freeze Frame/Field. Video, Color, Set-Up, Hue level Á¶Á¤°¡´É. 1U ÀÔ·Â : Composite x2, Y/C x2 Ãâ·Â : Composite x2, Y/C x2
Dual Channel Time Base Corrector
TBC Synchronizer
MODEL 2X
The Model 2X is an all digital, Dual Channel TBC/Synchronizer offering simultaneous operation of two video channels that may be independently locked to different sync sources or genlocked together. Input sources may be synchronous or non-synchronous, composite or Y/C.
Each channel transcodes to Y/C and composite out at all times regardless of input type. Full proc amp controls for each channel are available at the front panel or may be remotely controlled from an optional control unit or RS232 port.
The Model 2X operates with all VCRs and other video sources. This unit offers an economical means to handle dual-channel time base correction and synchronization for a variety of applications while providing the same high performance operation and reliability you have come to expect from all digital processing products.
Features:
 |
Two Channels of TBC/Synchronizer in 1 Rack Unit Frame.
|
 |
NTSC, PAL or PAL-M Models
|
 |
All Digital Design for No Drift Operation
|
 |
Accepts Non-Synchronous Feeds - Y/C or Composite
|
 |
Transcodes to Composite and Y/C Regardless of Input Type
|
 |
Operates with all VCRs
|
 |
Full Proc Amp Controls - Both Channels
|
 |
Occupies 1 19" x 1 3/4 Rack Unit
|
 |
Channels May be Genlocked or Independent
|
 |
"EE" Option Provides (for both channels): 3 Way Adaptive Comb Filtering
|
 |
AGC On/Off
|
 |
Vertical Color Advance - 1,2 or 3 Lines
|
 |
Horizontal Chroma-to Luma Adjust
|
 |
Detail Enhancement
|
 |
Freeze Frame/Field
|
 |
Variable Rate Strobe
|
 |
3/4" U-Matic Hi and Lo Band Component Input Option |
INTERFACE (Each Channel)
|
Inputs |
Video (Composite) |
1.0 Vpp, 75 Ohm, BNC |
|
|
Y/C (S-Video) |
4-Pin |
|
|
3/4 DUB Cable* |
-C Cable, Option |
|
Outputs |
Video (Composite) |
1.0 Vpp 75 Ohm, BNC |
|
|
Y/C (S-Video) |
4-Pin |
|
Genlock in |
|
High Impedance, Looping or Independent fro Each Channel |
|
RS232 Interface |
|
25-Pin D, Option | Transcodes Y/C and Composite to Y/C and Composite.
PERFORMANCE (Each Channel)
|
Window |
625 Line, PAL; 525 Line, NTSC or PAL-M |
|
Bandwidth |
5.5 MHz |
|
Signal to Noise Ratio |
58dB |
|
Differential Phase |
1 degree |
|
Differential Gain |
2 percent |
|
K-Factor (2T) |
1 percent |
|
Sampling |
8 Bit Luma / 8 Bit Chroma (CCIR-601, 4:2:2) |
|
Residual Time Base Error |
+/- 15 nsec. |
|
Composite Auto Bypass |
If AC Power or Power Supply Fails |
OPERATIONAL CONTROLS AND INDICATORS (Each Channel)
|
Input Selector |
Composite or Y/C |
|
Freeze Switch |
Off / Field / Frame |
|
Strobe |
Field or Frame, Variable Rate |
|
Enhance Switch |
Normal / High / Low |
|
AGC |
On / Off |
|
Video Level Control |
+/- 3 dB |
|
Color Level Control |
+/- 6 dB |
|
Set-up Level Control |
+/- 10 IRE |
|
Hue (NTSC Only) |
+/- 45 degrees |
|
V-Color Advance |
1, 2 or 3 Lines |
|
H-Chroma / Luma Adjust |
+/- 1 usec. |
|
H-Position |
+/- 2 usec. |
|
Go To Black & White |
On / Off |
|
H-Phase Adjust |
+/- 1 usec. |
|
Burst Phase Adjust |
+ 360 degrees |
|
Genlock Indicator |
LED (Green) |
|
Power On Indicator |
LED (Red) One per unit |
ENVIRONMENTAL (Full Unit)
|
Operating Temperature |
+32 F (0 C) to 113 F (45 C) |
|
Operating Humidity |
10% to 95% RH, Non-Condensing |
|
Power Supply |
117 or 220 VAC, +/- 10%, 50 or 60 Hz.
DC Option: 12,24,36 or 48 V +/- 25% |
|
Power Dissipation |
25 Watts |
|
Height |
1.75 in. (4.45 cm) |
|
Width |
19 in. (48.3 cm) |
|
Depth |
15 in. (38.1 cm) |
|
Weight |
16 lbs. (6.8 kg) |
OPTIONS
|
"EE" |
3-Way Adaptive Digital Comb Filter Option |
|
232 |
RS232 Interface Option |
|
C |
High Performance 3/4 DUB Cable Option |
|
R-1 |
Hand Held Remote Control |
|
R-2 |
Rack Mountable Remote Control |
|