Dual Channel Time Base Corrector TBC Synchronizer - 2X

Dual TBC/Synchronizer
Composite, Y/C ÀÔ·ÂÀÇ TBC/ Synchronizer.
NTSC/PAL °â¿ë. Freeze Frame/Field.
Video, Color, Set-Up, Hue level Á¶Á¤°¡´É. 1U
ÀÔ·Â : Composite x2, Y/C x2
Ãâ·Â : Composite x2, Y/C x2  
 

Dual Channel Time Base Corrector

TBC Synchronizer

 
MODEL 2X

 

The Model 2X is an all digital, Dual Channel TBC/Synchronizer offering simultaneous operation of two video channels that may be independently locked to different sync sources or genlocked together. Input sources may be synchronous or non-synchronous, composite or Y/C.

Each channel transcodes to Y/C and composite out at all times regardless of input type. Full proc amp controls for each channel are available at the front panel or may be remotely controlled from an optional control unit or RS232 port.

The Model 2X operates with all VCRs and other video sources. This unit offers an economical means to handle dual-channel time base correction and synchronization for a variety of applications while providing the same high performance operation and reliability you have come to expect from all digital processing products.

 

Features:

bullet Two Channels of TBC/Synchronizer in 1 Rack Unit Frame.
bullet NTSC, PAL or PAL-M Models
bullet All Digital Design for No Drift Operation
bullet Accepts Non-Synchronous Feeds - Y/C or Composite
bullet Transcodes to Composite and Y/C Regardless of Input Type
bullet Operates with all VCRs
bullet Full Proc Amp Controls - Both Channels
bullet Occupies 1 19" x 1 3/4 Rack Unit
bullet Channels May be Genlocked or Independent
bullet "EE" Option Provides (for both channels): 3 Way Adaptive Comb Filtering
bullet AGC On/Off
bullet Vertical Color Advance - 1,2 or 3 Lines
bullet Horizontal Chroma-to Luma Adjust
bullet Detail Enhancement
bullet Freeze Frame/Field
bullet Variable Rate Strobe
bullet 3/4" U-Matic Hi and Lo Band Component Input Option

 

INTERFACE (Each Channel)

Inputs

Video (Composite)

1.0 Vpp, 75 Ohm, BNC

 

Y/C (S-Video)

4-Pin

 

3/4 DUB Cable*

-C Cable, Option

Outputs

Video (Composite)

1.0 Vpp 75 Ohm, BNC

 

Y/C (S-Video)

4-Pin

Genlock in

 

High Impedance, Looping or Independent fro Each Channel

RS232 Interface

 

25-Pin D, Option

Transcodes Y/C and Composite to Y/C and Composite.

 

PERFORMANCE (Each Channel)

Window

625 Line, PAL; 525 Line, NTSC or PAL-M

Bandwidth

5.5 MHz

Signal to Noise Ratio

58dB

Differential Phase

1 degree

Differential Gain

2 percent

K-Factor (2T)

1 percent

Sampling

8 Bit Luma / 8 Bit Chroma (CCIR-601, 4:2:2)

Residual Time Base Error

+/- 15 nsec.

Composite Auto Bypass

If AC Power or Power Supply Fails

OPERATIONAL CONTROLS AND INDICATORS (Each Channel)

Input Selector

Composite or Y/C

Freeze Switch

Off / Field / Frame

Strobe

Field or Frame, Variable Rate

Enhance Switch

Normal / High / Low

AGC

On / Off

Video Level Control

+/- 3 dB

Color Level Control

+/- 6 dB

Set-up Level Control

+/- 10 IRE

Hue (NTSC Only)

+/- 45 degrees

V-Color Advance

1, 2 or 3 Lines

H-Chroma / Luma Adjust

+/- 1 usec.

H-Position

+/- 2 usec.

Go To Black & White

On / Off

H-Phase Adjust

+/- 1 usec.

Burst Phase Adjust

+ 360 degrees

Genlock Indicator

LED (Green)

Power On Indicator

LED (Red) One per unit

ENVIRONMENTAL (Full Unit)

Operating Temperature

+32 F (0 C) to 113 F (45 C)

Operating Humidity

10% to 95% RH, Non-Condensing

Power Supply

117 or 220 VAC, +/- 10%, 50 or 60 Hz.

DC Option: 12,24,36 or 48 V +/- 25%

Power Dissipation

25 Watts

Height

1.75 in. (4.45 cm)

Width

19 in. (48.3 cm)

Depth

15 in. (38.1 cm)

Weight

16 lbs. (6.8 kg)

OPTIONS

"EE"

3-Way Adaptive Digital Comb Filter Option

232

RS232 Interface Option

C

High Performance 3/4 DUB Cable Option

R-1

Hand Held Remote Control

R-2

Rack Mountable Remote Control


                   

 
¸ñ·Ï