• PAL and 625 Y/C Video Formats
• NTSC and 525 Y/C Video Formats
• Multi Standards 525/625 Video Formats
• Complete with stereo audio tone outputs

The TSG-700/701/705 genlockable test signal generators for studio off line or out-of-service equipment testing. With genlock capability, the TSG-700/701 can serve as the main test generator for teleproduction studios, broadcast stations, and cable facilities. Its unique complement of 12 signals was selected for general studio applications. A stereo audio tone output completes the package. The dual-standard TSG-705 offers a solution for both NTSC and PAL on a single test signal generator, while the TSG-700 and TSG-701 are specific for NTSC and PAL applications respectively.

Generator Outputs
Configuration	1 Y/C output, 2 composite outputs
Gain error	Less than +/- 1%
Chroma/Luma gain error	Less than +/- 2%
Chroma/Luma delay error	Less than +/- 10 nsec
Frequency response	Within +/- 3% to 5.8 MHz
Output return loss	Greater than 30 dB to 5 MHz
Subcarrier frequency (int ref)	3.579545 MHz +/- 50 Hz (NTSC)
	4.43361875 MHz +/- 50 Hz (PAL)
SC/H accuracy	Within +/- 10o
Genlock Input
Input configuration	NTSC or 525 Y/C (NTSC)
	PAL or 625 Y/C (PAL)
Input impedance	75 OHM internal termination (no loop thru)
Return loss	Greater than 36 dB to 5 MHz
Input level range	1 V p-p +/- dB
Input signal-to-noise ratio	Greater than 35 dB
Burst lock range	3.579545 MHz +/- 200 Hz (NTSC)
	4.43361875 MHz +/- 200 Hz (PAL)
Burst lock jitter	Less than 1o
Sync lock range	15.73426 kHz +/- 0.001% (NTSC)
	15.625 kHz +/- 0.001% (PAL)
Sync lock jitter	Less than 10 nsec
Audio tone output (TSG-700, TSG-701 & TSG-705)
Configuration	One differential stereo channel
Frequency	1 kHz
Level	+4 dBm, balanced into 600 OHMs
Test Signals - TSG-700 (NTSC)
SMPTE color bars	EIA bars, reverse blue bars, IWQ
Multiburst	0.5, 1.5, 2.0, 3.0, 3.58, and 4.1 MHz
NTC7 combination	Multiburst and modulated pedestal
NTC7 composite	Pulse, bar, mod pulse, and mod staircase
Convergence	Grid, no dots
Safe title	10% safe title area markers
Modulated ramp	40 IRE chroma on 100 IRE ramp
Linear ramp	100 IRE ramp, no chroma
5 step staircase	100 IRE luminance, no chroma
Window	Window 100% white
(Sin X) / X	4.75 MHz spectrum
Black	7.5 IRE setup
Test Signals - TSG-701 (PAL)
EBU 75% bars with CCIR ITS	75% saturation, full field colour bars
EBU 100% bars with CCIR ITS	100% saturation, full field colour bars
75% bars/red with CCIR ITS	75% bars in split field with Red field
Red field	Full field 75% saturation red
CCIR 17 with CCIR ITS	White bar, 2T pulse, 20T mod pulse, 5-step
CCIR18 with CCIR ITS	Multiburst at 0.5, 1.0, 2.0, 4.0, 4.8 & 5.8 MHz
CCIR 330 with CCIR ITS
CCIR 331 with CCIR ITS	Modulated pedestal and extended burst
Black	0 V, full field
White	0.7 , full field
Pludge	4 levels white and +/- 2% black reference
Grille	Vertical and horizontal grid lines
CCIR ITS	Included with the CB and CCIR full field signals
Test Signals - TSG-705 (NTSC & PAL)
NTSC signals:
FCC color bars w/FCC VITS	Full field 75% FCC color bars
FCC multiburst w/FCC VITS	Multiburst 0.5, 1.25, 2.0, 3.0, 3.58, & 4.1 MHz
NTC7 Composite w/NTC7 VITS	White bar, 2T pulse, mod 10T pulse, mod 5-step
Modulated ramp w/NTC7 VITS	0 to 100 IRE ramp w/40 IRE p-p modulation
PAL signals:
EBU 75% bars w/CCIR ITS	75% saturation, full field colour bars
Multiburst (CCIR 18) w/CCIR ITS	Multiburst 0.5, 1.0, 2.0, 4.0, 4.8, & 5.8 MHz
Composite w/modified UK National ITS	White bar, 2T pulse, mod 10T pulse, mod 5-step
Modulated ramp w/modified UK National ITS	0 to 0.7 V ramp w/0.3 V p-p modulation

Note: The line 19 and 332 UK National ITS signal (composite) has been modified for 280mV p-p subcarrier on the staircase, instead of the usual 140mV p-p.