Epica
많은 수의 비디오, 오디오 신호를 입력 받아 출력을 시켜주는 모듈형 타입의 장비
10 MHz , 300 MHz 대역의 주파수. 매크로 프로그램 가능
Standard RS-232 / 422 control port, APControl software 제공
입력 : Composite Video, S-Video & Y/C, Component, HDTV, RGB, RGBS, RGBHV
출력 : Composite Video, S-Video & Y/C, Component, HDTV, RGB, RGBS, RGBHV
사이즈 : (16, 25 RU) 16x16 ~ 256x256
|
|
|
|
| |
Epica Series is the perfect solution for large scale, high-performance signal routing, or for smaller scale routing that requires large growth capability. The Epica-128 and Epica-256 are modular, allowing system designers to start as small as 16 inputs/outputs, and scale the system up to a full 512x512 per signal type.
The Epica Series is a dependable high performance solution for mission critical applications. Each system includes an integrated self-diagnostic suite and standard dual-redundant power supplies.
|
Features:
|
|
- Ultra-flat video bandpass curve measured at a tight +/-3 dB.
- The Epica Series is available in two enclosure sizes: Epica-256 (25 RU) and the Epica-128 (16 RU)
- Choose input and output boards in increments of 16 up to 512x512 per signal type. Combine multiple signal types in various I/O sizes in the same enclosure (as space allows) or in the same system via linking enclosures.
- Virtual Matrix Programming levels allow multiple enclosures (routers) to be treated as a single system, or single systems to be treated as multiple independent routers.
- Dual-redundant, hot-swappable power supplies
- Breakaway to route audio, audio follow video or video
- Groupings
- Programmable macro functions
- Self-diagnostics
- Optional SYNC for vertical interval switching
- Optional volume control
- Standard front panel control
- Standard RS-232/422 control port
- Supports simple BCS serial control protocol
- Ships with free APControl software
- Remote control options available
- TCP/IP control available via an external module
- Modular in increments of 16 inputs and outputs to a maximum of 512x512 per signal type
- Ultra-Wideband 300 MHz Video bandwidth in any routing state including fully-loaded
- Integrated self-diagnostic suite minimizes downtime
- Disconnect any crosspoint from front panel or serial control
- Switch any input to any or all outputs in any combination
- I/O boards are hot-swappable and feature tool-free extraction
- 32-bit processor with Ethernet, Lontalk(tm), and RS-232/RS-422
|
I/O Range:
|
- 16x16 through 512x512
(increments of 16 inputs and/or outputs) |
Signal Types:
|
- Composite, S-video, Y/c
- HDTV, Y/Pb/Pr, YUV
- RGB, RGsB, RGBS, RGBHV
- Mono audio, Stereo audio
- S/PDIF, AES 75 Ω*
NOTE: S/PDIF and AES 75 Ω routed over standard video boards. |
General
|
| |
AC Power: |
85 -264 VAC single phase |
| |
Power Consumption: |
(470 Typical) 600 Watts per loaded enclosure |
| |
Operation Temperature: |
32° to 100° F ( 0° to 43° C ) |
| |
Humidity: |
0 to 90% non-condensing |
| |
Dimensions Epica-128: |
25" (63.50 cm) depth
17.36" (44.77 cm) width behind mounting ears
19" (48.26 cm) width with mounting ears |
| |
Height Epica -128: |
28" (71.12 cm) 16 RU |
| |
Weight Epica-128: |
140 lbs. per loaded enclosure |
| |
|
|
| |
Dimensions Epica-256: |
25" (63.50 cm) depth
17.4" (44.2 cm) width behind mounting ears
19" (48.26 cm) width with mounting ears |
| |
Height Epica-256: |
43.75" (113.13 cm) 25 RU |
| |
Weight Epica-256: |
170 lbs. per loaded enclosure |
| |
|
|
Standard Audio
|
| |
Input Level (max): |
+26.6 dBu, balanced, no volume control
+22 dBu, balanced, with volume control |
| |
Input Impedance: |
18 kΩ |
| |
Output Level (max): |
+26.6 dBu, balanced, no volume control
+22 dBu, balanced, with volume control |
| |
Output Impedance: |
50 Ω |
| |
Frequency Response: |
<+/- 0.1 dB (20 Hz to 20 kHz) |
| |
THD + Noise: |
< 0.03% ( 20 Hz to 20 kHz, Vin= -6 dBu to +26.6 dBu, no volume control)
<0.02% (20 Hz to 20 kHz, Vin = 0 to +26.6 dBu), no volume control)
< 0.03% ( 20 Hz to 20kHz, Vin= -10 dBu to +22 dBu, with volume control) |
| |
Signal to Noise Ratio |
> 110 dB (20 Hz to 20 kHz, Vin = +20 dBu) |
| |
Crosstalk |
< -95 dB ( 1 kHz, Vin + 20 dBu) |
| |
Signal to Noise Ratio |
> 100 dB (20 Hz to 20 kHz, Vin = +20 dBu) |
| |
Output Gain Adjustment Range: |
+6 dB to -6 dB |
| |
Input Volume Adjustment Range: |
+10 dB to -70 dB (mute) |
| |
Output Volume Adjustment Range: |
+10 dB to -70 dB (mute) |
| |
|
|
Standard Video
|
| |
Input Level (max) |
+/- 5 Volts |
| |
Input Impedance: |
75 Ω |
| |
Output Level (max): |
+/- 5 Volts |
| |
Output Impedance: |
75 Ω |
| |
Frequency Response: |
10 MHz or better (+/- 3 dB) |
| |
Crosstalk: |
<-50 dB (f = 5 MHz) |
| |
Differential Gain: |
<0.2% or better (f = 3.58 MHz) |
| |
Differential Phase: |
<0.2° or better (f = 3.58 MHz) |
| |
Signal to Noise Ratio: |
>60 dB (Vin = 0.7, 100% IRE) |
| |
|
|
Wideband Video
|
| |
Input Level (max): |
+/- 1 Volt |
| |
Input Impedance: |
75 Ω |
| |
Output Level (max): |
+/- 1 Volt |
| |
Output Impedance: |
75 Ω |
| |
Frequency Response: |
300 MHz or better (+/- 3 dB) |
| |
Crosstalk: |
<-60 dB (f = 5 MHz) |
|
|
BIC_epica_specsheet.pdf (660KB)
